The change does not affect the Foligno area (area D), for municipalities in the area E and F but less restrictive limits for the fixtures
27 / 01/2010 - The Ministry of Economic Development has developed a decree that changes the limits of thermal transmittance of windows required in 2010 to access tax deductions of 55% for the rehabilitation of buildings.
recall that on 1 January 2010 entered into force transmittance U of the new limits, set by the DM March 11, 2008, implementing the 2008 Budget, more stringent than those in force until the end of 2009 (read more).
To qualify for deduction of 55%, in fact, until 31 December 2009 it was necessary to comply with limit values \u200b\u200bthat the Decree No. 192/2005 (as amended by Decree No. 311/2006) fissacome mandatory for everyone (regardless of tax deductions) from January 1, 2010. From 1 January 2010 have been set even lower values.
Ministerial Decree issued just changed the values, following the issuance of the decrees of the Legislative Decree 192/2005 (Presidential Decree 59/2009 and Guidelines for energy certification) and experience of application of these years. The MSE was therefore considered appropriate to recalibrate the technical requirements for the eligibility of tax incentives and overcome some problems concerning the implementation of Sections 344 and 345 of the 2007 Budget.
In particular, we have raised the values \u200b\u200bfor the climate zones E and F (one of which is granparte of the Italian territory) and lower ones for areas A and B (which affecting some areas of the South).
The decree granted the requests made by Uncsaal compliance with the limits for the current year indicated by the 2008 Budget, the limits that threatened to penalize consumers who are forced to buy windows iperperformanti, and therefore more expensive, even if it is not necessary for ensure balanced thermal performance.
Below is a table with the limits for opening and closing similar:
Source Edilportale
| climate zone | limits in force since 1 January 2010 (DM 11/03/2008 ) | limits under the newly issued DM |
| A | 3.9 | 3.7 |
| B | 2,6 | 2,4 |
| C | 2,1 | 2,1 |
| D | 2,0 | 2,0 |
| E | 1,6 | 1,8 |
| F | 1,4 | 1,6 |
0 comments:
Post a Comment